M-200英文版塑料摩擦磨損試驗機的詳細資料：
產品名稱：塑料滑動摩擦磨損試驗機
Product Name: plastic slide friction wear testing machine
產品型號：M-200
Product type: M-200
控制方式：微機控制
Control mode: microcomputer control
一、適用范圍及功能
One, the scope and function
符合標準：GB/ T 3960-1983 塑料滑動摩擦磨損試驗方法
Standard Test Method for friction and wear of GB/: T 3960-1983 plastic sliding
GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法
Test method GB/T 9141.8-1999 flexible graphite sheet sliding friction coefficient
適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦，磨損性能測試，也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。
Sliding friction is suitable for plastic products, rubber products, graphite sheet or other composite materials, wear performance test, also can be the friction force, the test sample in the friction coefficient and wear volume determination.
本儀器融合了當前的智能電路系統進行控制，并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成，本儀器具有測控精度高，操作便捷等優勢，是科研院所、質檢機構、實驗室研究*的試驗設備。
The instrument combines the latest inligent circuit control system, combined with the old M-200 wear testing machine, friction and function upgrade, the instrument has high control accuracy, convenient operation and other advantages, is the study of test equipment, quality inspection institutions, the preferred the laboratory research institute.
M-200型摩擦磨損試驗機主要由試驗主機及智能控制系統兩大部分構成，通過微機控制系統進行操作試驗，在試驗過程中同時可以顯示數值、扭矩、時間曲線，并可以隨意設定試驗次數，顯示當前試驗數值，設定時間及當前試驗時間等多種功能，隨機配備彩色打印機，可以打印出帶有曲線、表格數據等標準要求的試驗報告。
Friction and wear testing machine is mainly composed of the host and the inligent control system consists of two parts of M-200, operation test by microcomputer control system, in the process of test and can display the numerical, torque, time curve, and can set the test number freely, display the current test data, a variety of functions the setting time and the test time, random equipped with color printer, you can print the test report with a curve, form data standard.
二、功能特點：
Two, function characteristics:
1、試樣尺寸： 30mm×7mm×6mm
1, the sample size: 30mm x 7mm x 6mm
2、轉動速度： 0-200轉/分 （可調）
2, rotation speed: 0-200 RPM (adjustable)
3、負 荷： 196N ± 0.1%（可增至392N）
3, the load: 196N ± 0.1% (to 392N)
4、摩擦環尺寸：￠40×10mm ，倒角0.5×45°，外圓表面與內圓同心度偏差小于0.01
4, the friction ring size: 40 x 10mm -, chamfer 0.5 * 45 degrees, surface of the outer circle and inner circle concentricity deviation is less than 0.01
5、摩擦環材質：45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8
5, the friction ring material: 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish ▼ 8
6、摩擦力矩： 0--4N·m
6, the friction moment: 0--4N M
7、砝碼重量：4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能
7, weight: 4KG weight a, 1KG weight 4, weight function can be realized
三、精度：
Three, accuracy:
1、速度精度：1%
1, speed accuracy: 1%
2、負荷精度：0.5%
2, load precision: 0.5%
3、摩擦力矩精度：1%
3, the friction torque accuracy: 1%
4、計數器精度：1S
4, the counter accuracy: 1S
5、傳感器測量精度：1% FS
The 5, sensor measurement accuracy: 1% FS
四、軟件操作截圖：
Four, the software operation:
試驗主界面：
Testing main interface:
參數設置：
Parameter settings:
打印報告：
Print report:
