產品型號：JSN1801

產品名稱：發動機冷卻液鋁泵氣穴腐蝕測定器 (JSN1801)

產品說明：

JSN1801發動機冷卻液鋁泵氣穴腐蝕測定器
一、符合SH/T0087、ASTMD2809標準
二、主要技術參數：
鋁泵轉速： 2675r/min、4600±100r/min
壓力指示： 103±3Kpa
控制溫度： 63~68℃、113±3℃
加熱功率： 2kw 
整機功率： 4.2kw
工作電源： AC380V±10%  50HZ
外形尺寸： 1100×660×1400=長×寬×高（mm）
整機重量： 180Kg
三、性能及特點
1、采用鋁泵和發動機前蓋,鋁泵拆卸更換方便。
2、采用防爆電機，兩種泵速用變頻器調速，數顯表顯示實測速度，準確直觀，電路控制裝有超溫保護。
3、系統采用不銹鋼管連接，臺面用不銹鋼制作，緊固件采用不銹鋼螺絲，易拆卸不易生銹。
4、采用多功能數顯計時器、中途停機后能延續計時。
5、采用電熱管加熱, 貯液罐上裝有安全閥，能確保儀器運行的安全可靠。
6、儀器采用進口數顯溫度控制器，PID跟蹤控溫精度高。

JSN1801 engine coolant aluminum pump cavitation corrosion tester

A, in line with SH/T0087, ASTMD2809 standards

Ii. Main Technical parameters:

Aluminum pump speed: 2675r/min, 4600±100r/min

Pressure indication: 103±3Kpa

Control temperature: 63~68℃, 113±3℃

Heating power: 2KW

Machine power: 4.2KW

Power supply: AC380V±10% 50HZ

Dimensions: 1100×660×1400= Length × width × height (mm)

Machine weight: 180Kg

Iii. Performance and Characteristics

1. Aluminum pump and engine front cover are adopted for easy removal and replacement of aluminum pump.

2, the use of explosion-proof motor, two kinds of pump speed with frequency converter speed, digital display table shows the measured speed, accurate and intuitive, circuit control with overtemperature protection.

3, the system is connected with stainless steel pipe, the table is made of stainless steel, the fastener is made of stainless steel screws, easy to remove and not easy to rust.

4. Multi-function digital display timer is adopted, which can continue the timing after stopping midway.

5. Electric heat pipe is used for heating, and safety valve is installed on the liquid storage tank, which can ensure the safe and reliable operation of the instrument.

6, the instrument adopts imported digital display temperature controller, PID tracking temperature control precision is high.