The Jones & Shipman 524/624 Easy range, has been designed specifically to offer unrivalled ease-of-use coupled to the highest levels of precision and accuracy. Two (2) models are available with table capacities of 500 x 200 mm & 600 x 200 mm each of which will enable inexperienced and experienced operators alike to be immediately more productive.Incorporating a full colour Touchscreen used to access our own simple and fast-to-set software, coupled with membrane-type touch keys and electronic handwheels, this ‘Self Teach’ grinder at start-up offers the operator three simple options : Manual, Dress or Grind cycle modes. In Manual mode the Easy operates as a simple hａnd controlled machine, with manual dress and no setup procedures. Work speeds and feeds are adjustable via the touchscreen. Dress mode offers five standard wheel shape options, Flat, Slot, Facing, Vee form and Full ISO with one or two diamonds as needed. Grind Cycle mode allows from 1 only, or up to 20 Grind cycles, as the complexity of the component dictates. Each developed to offer the operator easy-to-follow colour icon based programming screens giving the the advantage of CNC control without the complexity of traditional CNC systems. This extremely simple system guides the operator and allows him to digitise positions and create programs without any computer knowledge.
Product Features
Specially designed Base, Saddle, Table and Column to offer High Rigidity and Stiffness without loss of Precision.
Fully Interlocked enclosed table guarding.
‘Self Teach’ Colour Touchscreen control.
Fanuc® Digital AC servo motors and drives.
Heidenhain® ‘Absolute’ nano scale feedback.
Equally at home with ‘One Offs’ or Batch Production.
Quicker to set than your old manual machine.
Wheelspindle operates on two pairs of matched High Precision Angular Contact ball bearings.
High Precision Ballscrews on Y and Z axes.
Easy set Proximity switch controlled Hydraulically operated Table feed.
Extremely sensitive wheelfeed assembly.
Easy & Rapid setup for Automatic Cycles.
Easy Manual Operation.
In Cycle/Out of Cycle Dressing with Full Compensation.
Dress on Demａnd with Full Compensation.
Straight, Facing, Slotting or Vee Form Wheel colour Macros.
Easy Form Dressing of Complex Profiles.
No Expensive & Complex Dressing Devices Required.
Plunge, Area, Face, Multi-Plunge, Multi-Slot, Multi-Plunge & Area grind colour Macros.
Easy Down Load/Up Load to USB memory stick.
| 524EASY | 624EASY | ||
| 加工范圍 | |||
| 磨削長度X寬度 | 500×200 | 600×200 | mm |
| 砂輪到工作臺距離（新砂輪） | 380 | 380 | mm |
| 工作臺負荷（包含磁力吸盤在內，如果使用） | 160 | 160 | kg |
| 砂輪頭架 | |||
| 標準砂輪尺寸 | Φ254×19×76.2 | Φ254×19×76.2 | mm |
| 砂輪尺寸 | Φ254×19×76.2 | Φ254×19×76.2 | mm |
| 其它砂輪尺寸 | Φ170或200×19×76.2 | Φ170或200×19×76.2 | mm |
| 砂輪速度－50Hz | 2400 | 2400 | rpm |
| 砂輪速度－60Hz | 2880 | 2880 | rpm |
| 砂輪電機功率：標準/選項 | 2.2/3.75 | 2.2/3.75 | kW |
| 工作臺 | |||
| 行程/手動/液壓 | 610/500 | 710/600 | mm |
| 速度范圍 | 2~25 | 2~25 | m/min |
| 手輪每一轉位移量 | 60 | 60 | mm |
| T型槽寬度 | 14.4 | 14.4 | mm |
| 地面到工作臺距離 | 1025 | 1025 | mm |
| 橫向進給 | |||
| 行程 | 192 | 192 | mm |
| 電子手輪每一刻度進給量 | 0.001,0.010,0.100 | 0.001,0.010,0.100 | mm |
| 可編程最小自動進給增量 | 0.0001 | 0.0001 | mm |
| 自動進給速率 | 1~3000 | 1~3000 | mm/min |
| 快進速率 | 3000 | 3000 | mm/min |
| 無火花磨削 | 0~99 | 0~99 | |
| 橫向進給控制 | GEFanuc數字交流伺服電機 | GEFanuc數字交流伺服電機 | |
| 反饋 | Heidenhain 50納米光柵尺 | Heidenhain 50納米光柵尺 | |
| 砂輪進給 | |||
| 電子手輪每一刻度進給量 | 0.001,0.010,0.100 | 0.001,0.010,0.100 | mm |
| 可編程最小自動進給增量 | 0.0001 | 0.0001 | mm |
| 快進速率 | 3000 | 3000 | mm/min |
| 進給控制 | GEFanuc數字交流伺服電機 | GEFanuc數字交流伺服電機 | |
| FEEDBACK | Heidenhain 50納米光柵尺 | Heidenhain 50納米光柵尺 | |
| 數據傳輸接口 | RS232+Easy Comm | RS232+Easy Comm | |
| 尺寸 | |||
| 機床重量（近似） | 1370 | 1370 | kg |
| 裝運尺寸 | 9.85 | 9.85 | m3 |
