出口國外X熒光定硫儀符合GB/T17040和GB11140以及石油化工行業標準SH/T0742的相關要求,也符合ASTMD4294-02的要求。

出口國外X熒光定硫儀技術指標

1.測硫范圍:7ppm～5%;

2.重復性(r):＜0.2894(S+0.1691);

3.再現性(R):＜0.1215(S+0.05555);

4.檢出限: 7ppm;

5.油品量:2～2.5ml(相當油層厚度4mm～5mm);

6.測量時間:60、120、240、300、600秒,任意設定;

7.單樣品自動測量,測量次數:2、3、5、10、50次任意設定,測量結束給出平均值和標準偏差;

8.校正曲線數:儀器可存取9條標定曲線,5條為一元一次直線,4條為二項式拋物線;

9.工作條件:溫度5～40℃;相對濕度:≦85%(30℃);

10.電源:AC220V±20V,50Hz,額定功率:30W;

11.尺寸和重量:468mm×368mm×136mm;13kg;

The instrument is specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with electrical, mechanical and microprocessor integration design, so it is rapid and accurate. It can meet the requirements of National Standard GB/T 17040 and GB/T11140 on repeatability and reproducibility, and it can also meet requirements of ASTM D4294-03 on these indexes. It provides a measure to determine sulfur content during petroleum or petrochemical production process.

Main technical specification and parameters

(1) Measurement range: 7 ppm to 5%;

(2) Repeatability (r): ＜0.02894(S+0.1691);

(3) Reproducibility (R): ＜0.1215(S+0.05555);

(4) Detection limit: 7 ppm;

(5) Oil sample quantity: 2～3 ml (it is equal to sample depth of 3 mm～4 mm);

(6) Measurement time: it can preset 60, 120, 240, 300, and 600 s at random;

(7) It can make determination automatically for single sample. Measurement times: can set 2, 3, 5, 10, and 50 at random; it will show average value and standard deviation at end of measurement.

(8) Calibration curve numbers: it can save 9 calibration curves. 5 pieces of them are unary linear equation and 4 pieces of them are unary quadratic equation.

(9) Working condition:

a. Ambient temperature: 5～40℃;

b. Relative humidity: ≦85% (30 ℃);

(10) Power supply: AC 220V±20V, 50 Hz; Rated power: 30 W;

(11) Size and weight: 468mm×368mm×136mm; 13 kg;