產品型號：JSH2302
產品名稱：自動潤滑脂油蒸發損失測定器(JSH2302)
產品說明：
JSH2302自動潤滑脂油蒸發損失測定器
一、符合GB/T7325標準
二、主要技術參數：
控制方式：?jiǎn)纹瑱C(jī)控制
顯示方式：液晶屏顯示
控溫范圍：90～320℃任意設定
控溫精度：±1℃
氣體流量：2L/min±0.1L 自動恒定
實驗孔數：2孔
工作電源：AC220V±10％ 50HZ
功 率：1.2kw
外形尺寸：520×420×390 mm（長×寬×高）
整機重量：32kg
三、性能及特點：
1、儀器的特點是用單片機對熱浴溫度，氣體流量以及工作時間，經過用戶設定后，自動對上述參數進行調整和控制，以達到減少人工記錄，提高工作效率，真正做到該機無人值守。
2、儀器采用電熱板對金屬鋁合金加熱，升溫快，熱容量大，溫度穩定，采用金屬浴代替油浴，克服了油浴的各種弊端。
3、儀器可從常溫至320℃范圍內任意一點溫度進行自動控制。
4、儀器有2孔，可對比做樣。
JSH2302 automatic grease oil evaporation loss tester
I. It conforms to GB/T7325 standard
Ii. Main Technical parameters:
Control mode: single chip microcomputer control
Display mode: LCD display
Temperature control range: 90 ~ 320℃ set at will
Temperature control accuracy: ±1℃
Gas flow rate: 2L/min±0.1L automatic constant
Number of experiment holes: 2
Power supply: AC220V± 10% 50HZ
Power: 1.2 kw
Dimensions: 520×420×390 mm (length × width × height)
Machine weight: 32kg
Iii. Performance and Characteristics:
1, the characteristics of the instrument is to use a single chip microcomputer on the hot bath temperature, gas flow and working time, after the user set, automatically adjust and control the above parameters, in order to reduce manual recording, improve work efficiency, truly unattended this machine.
2. The instrument adopts electric heating plate to heat the metal aluminum alloy, which has the advantages of fast heating, large heat capacity and stable temperature. It adopts metal bath instead of oil bath to overcome various disadvantages of oil bath.
3. The instrument can be automatically controlled from room temperature to 320℃ at any point.
4. The instrument has 2 holes for comparison.
