*油量表示方法：
（注：當(dāng)所有出油口油量值一樣時，只用一個油量值表示）
例1:LH3-2表示為3位分配器,第1, 2,3 出油口油量全部為0.2ml每次。
例2:LH5-53235表示為5位分配器,第1 ,2 ,3 ,4 ,5出油口油量分別為0.5; 0.3; 0.2 ;0.3;0.5ml每次。
注：其中：7；8；9；10位，為5位和2；3；4；5位組合。6位為3位與3位的組合。
* oil quantity representation method:
(note: when the oil value is the same, only one oil value is used)
Example 1: LD3-2 indicates LD model and the amount of 1 and 2 oil outlet in 2allocator is 0.3ml each time.
Example 2:LD5-53235 indicates 5 allocators, and 1, 2, 3 outlet flow raterespectively is 0.3ml, 0.5ml, 0.3ml, 0.5ml, and 0.4ml each time.
Note: among them: 7,8,9,10 bits is the combination of 5 bits and 2,3,4, or 5 bits.The 6 bits, the combination of 3 and 3 bits.
