1. 采用四驅、全液壓四支腿底盤，提供了設備運輸?shù)谋憬菪院徒?jīng)濟性；
2. 采用雙動力頭加大扭矩和大流量主泵，動力強勁，更加節能；
3. A型伸縮支腿，操作簡易，穩定性強，適應性廣；
4. 上車回轉采用緩沖保護系統，有效保證旋挖鉆機施工安全；
5. 全車油缸全部安裝雙向平衡閥，安全系數更高；
整機重量t Machine weight.(t) | 25 |
*大鉆孔深度m Maximum drilling depth.(m) | 30 |
*大鉆孔直徑mm Maximum drilling diameter .(mm) | 3000 |
發動機額定功率KW/rpm Engine rated power.(KW/rpm) | 184 |
行走驅動
| 四驅 |
動力頭扭矩kN.m Maximum torque of power head.(KN.m) | 120 |
動力頭轉速rpm Power head speed.(rpm) | 10-50 |
液壓系統工作壓力主泵MPa Maximum working pressure of hydraulic system main pump.(MPa) | 31.5 |
液壓系統流量主泵L/min Maximum bow rate of the main pump hydraulic system.(L/min) | 120 |
加壓系統加壓力KN Maximum pressurization force of the pressurization system(KN) | 100 |
加壓系統提升力KN Maximum lifting force of the pressurization system(KN) | 80 |
加壓系統行程m Maximum stroke of the pressurization system(m) | 2.5 |
主卷揚提升力KN Maximum lifting force of the main winch.(KN) | 12 |
主卷揚提升速度m/min Maximum lifting speed of the main winch(m/min) | 50 |
副卷揚提升力KN Maximum lifting force of the auxiliary winch.(KN) | 1.5 |
副卷揚提升速度m/min Maximum lifting speed of auxiliary winch(m/min) | 50 |
鉆桅左右傾角° Left and right inclination angle of drilling mast(°) | ±5 |
鉆桅前傾角° Forward and backward inclination angle of the drilling mast. (°) | ±5 |
工作狀態寬度mm Overall width of working state.(mm) | 3500 |
運輸狀態長度mm Overall length of transport status.(mm) | 10100 |
運輸狀態寬度mm Overall width of transport status.(mm) | 3000 |
運輸狀態高度mm Overall height of transport status.(mm) | 3750 |
