特別適合玻片分別浸泡不同的溶液的實驗。可以活動的玻璃染色架底部孔可以讓液體快速流出，方便液體的進出，染色缸與染色架配套使用。20片裝的染色缸：正好可以放置20片玻片（大小為75×25mm、75×38mm、75×51mm均可）。染色缸的尺寸107mm（L）x87mm（W）x70mm（H），染色缸整套包括：一個染色缸，一個蓋子，一個玻璃染色架及提手。
| 貨號 | 產品描述 | 規格 |
| 70312-20 | 20 Slide Unit Staining Dish | Set |
| 70312-21 | Dish only | each |
| 70312-22 | Cover only | each |
| 70312-23 | Dish and Cover only | each |
| 70312-24 | Slide Rack only | each |
| 70312-25 | Handle only | each |
| 適于前列腺、大腦、胸組織、眼睛等大組織塊的包埋 適用于科研實驗室、毒理實驗室 尺寸：- Inside: 64mm x 48mm x 13mm - Outside: 75mm x 52mm x 18mm
| ||||||||||||||||||
|
在電鏡室，當我們要對多個銅網（載網）樣本進行染色處理時，如果一個一個的對銅網進行操作顯然是費時費力的，25孔銅網染色板可以很好的解決這個問題，一次zui多可以染25個樣本。25孔使用簡單的字母定位每一樣本，使得染色時樣本之間不被混淆。有機的和酸性溶液對此套裝會有腐蝕，染色液不得使用這些，例如酒精基質的染液不能使用。配套兩個不同顏色的染缸，一個可以放醋酸雙氧鈾，另一個放檸檬酸鉛。
染色液建議使用量：
| 21 - 25 grids | 11ml |
| 16 - 20 grids | 9ml |
| 11 - 15 grids | 7ml |
| 06 - 10 grids | 5 ml |
| 01 - 05 grids | 3ml |
套裝包含：一個25孔彈性塑料染色板（the matrix），一個染色板蓋子（cover），2個染色缸（staining vessel）。
| 貨號 | 產品名稱 | 規格 |
| 71179-01 | Grid Staining Matrix System Kit | 套 |
A.Clean each piece before use. Flush with hot soapy water then rinse thoroughly.
B.Remove the cover from the body and load the number of grids to be stained into the wells. Start with the bottom row and fill compley before moving to the next row
C. Slide the cover over the body until the handle on the cover engages with the retaining pin on the handle of the body. You may need to gently lift the cover handle so that it will slide over the retaining pin and lock
D. Place the Matrix into an empty staining vessel. Add the appropriate volume of stain for the number of grids to be processed by allowing the stain to flow down the inside of the vessel, using a pipet or similar tool. If air is trapped within a grid containing well it is easy to remove by moving the Matrix to the front of the staining vessel and then quickly to the back. This will pull the trapped bubbles out of the wells. Be careful not to spill reagents during this process.
E. Rinsing of the grids can be done in a beaker or similar vessel （not provided
