Low Temperatuare Dynamic Mechanical Load Tester/Testing Machine for solar panel
purpose verification and ensure component under the different install angle suffer wind ,snow,or cover ice etc static ,dynamic load ability.width use to check PV component resistance press strength test , adopt dynamic holding press technical , simulate load test, in order to products under the load statue resistance press ability.
stanard It's according to IEC61215 , IEC61646 etc standard
Specificaitons 1.Machine table exterior size:L 320 × D 180 × H 195 cm 2.Test positive load the max 2400 Pa,negative load the max 2400 Pa 3.Aluminum extrusion structure , platform and support under the test suffer the force statue not deformation ( aluminum surface with the paint dealing , ensure its not discolor) 4.Customization test platform clamp , can according to the pending specimen install method to do the adjust ) 5.The max test size 120 × 240cm 6 . Calibrator:350 kg 7 .DC constant voltage and current power :0~100Vor 0~15A adjustable;the resolution 0.001V or 0.001A;the voltage setting accurate more than 0.1V,current setting value accurate more than 0.1A. 8..Cylinder number:4 groups, in total 8 pcs Cylinder outside diameter 80mm Pneumatic cylinder single the max pressure > 6 bar Pneumatic cylinder single group the max put out force > 300 kg Pneumatic cylinder stretch stroke:150 mm 9.sucker number 8 groups , in total 32 PCS Sucker diameter:120 mm Every pneumatic attach a vacuum pressure monitor Between the two suckers mid point spacing can adjust 120mm~ and 400mm 10.Running environment : 0oC , -20oC , -40 oC
