當前位置：賽默飛世爾科技（中國）有限公司集團>>細胞分析產品>>細胞成像>>50X 油鏡，消色差物鏡，蓋玻片校正

50X 油鏡，消色差物鏡，蓋玻片校正

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質0

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：客服查看聯系方式

更新時間：2023-04-01 07:57:09瀏覽次數：123次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  細胞分析產品

微球

流式細胞分析產品

細胞成像

全部產品列表

暫無信息

賽默飛世爾科技（中國）有限公司集團

經營模式：

商鋪產品：2508條

所在地區：

聯系人：客服（客服）

詢價 給他留言

產品簡介

50X 油鏡，消色差物鏡，蓋玻片校正

詳細介紹

This achromat objective is ideal for general applications. This is a coverslip-corrected objective that is optimized for imaging through #1.5 coverslips. All EVOS objectives offer outstanding optical performance from visible light to near infrared light. The extensive choice of objectives satisfies needs across the spectrum of magnifications and optical specifications.

Additional characteristics of this EVOS objective:

• Magnification: 50X
• Numerical Aperture: 0.95
• Working Distance: 0.19
• Immersion: Oil

Image Quality
Microscope objectives may be the most important components of an optical microscope because they are responsible for primary image formation. Image quality is crucial to experimental success and a requirement for publication; EVOS objectives afford that quality across the visible spectrum to near infrared light. This performance results from years of lens manufacture perfection. EVOS objectives have the same or better numerical apertures as any other manufacturer's in the same class, and the broad selection means you have choices for your imaging requirements.

Objective Classes

Achromat objectives are perfect for general applications, with standard correction of color and focus.

Fluorite objectives deliver excellent resolution and are made with higher numerical apertures than achromat objectives, resulting in brighter fluorescence signal and higher contrast imaging. The higher optical quality greatly reduces optical aberrations, and corrections for color and focus are at higher levels than achromat objectives. Fluorite objectives are ideally suited for fluorescence and demanding transmitted light applications, where the higher contrast make them ideally suited for color imaging.

Apochromat objectives are manufactured to the highest levels of resolution, fluorescence brightness, and contrast; chromatic aberrations are almost eliminated. They are recommended for the most demanding applications, particularly at magnifications of 60x and above. Apochromatic objectives are the best choice for the capture of color images in white light.

Brightfield Contrast versus Phase Contrast Objectives
Brightfield is the most basic form of light microscopy and is accomplished by sample absorption of light. A higher density area in a sample will absorb more light, thus increasing contrast in those areas.

Phase contrast objectives are most useful for hard to see, translucent specimens. This method of contrast is accomplished by converting phase shifts, caused by light passing through a translucent specimen, into brightness changes (i.e., contrast).

Long Working Distance versus Coverslip-Corrected Objectives
Long working distance (LWD) objectives are optimized for use through vessels with a nominal wall thickness of 0.9-1.5 mm. This includes vessels commonly used in cell culture and cell-based assays, such as slides, cell culture dishes and flasks, microtiter well plates, etc. Coverslip-corrected objectives are optimized for use through #1.5 coverslips (thickness approximately 0.17 mm). These objectives have a higher magnification/NA ratio and provide higher resolution compared to LWD objectives.

For additional choices, visit the EVOS Objectives selection guide
Explore the entire EVOS line of imaging systems and accessories

For Research Use Only. Not for use in diagnostic procedures.