南京鎮江常州無錫蘇州包裝印刷廢氣處理方法專業從事環保設備技術研究,設計制造企業,主要產品有uv光氧化設備,酸堿廢氣處理塔,有機廢氣處理設備,工業廢氣凈化,污水治理的環保企業

廣泛用于石油、化工、橡膠、涂裝、印刷等行業車間里揮發出的有害有機廢氣凈化處理中，苯類，醇類，醚類等有機廢氣均能凈化。該裝置系統設計完整，附屬設備配套齊全，凈化效率高，自動化程度高。它能有效地凈化車間環境、消除污染、改善勞動操作條件，確保工人身體健康，并能解決二次污染。zui適用于低濃度（50~1000ppm）且回收經濟價值不大，不宜采用吸附回收處理的有機廢氣，尤其對大風量的處理場合，均可獲得滿意的經濟效益和社會效益。

二、產品優點：
1、設計原理*，用材*，性能穩定，結構簡單，安全可靠，節能省力，無二次污染。設備占地面積小，重量輕。
2、采用窩蜂陶瓷狀為載體的貴金屬催化劑，阻力小，活性高。當有機蒸汽濃度達到2000ppm以上時，可維持自燃。
3、耗電量小，由于床層阻力小，用低壓風機就可以工作，耗電少，噪音低。
4、吸附有機物廢氣的活性炭層，用催化燃燒后的廢氣進行脫附再生，吸附后的氣體再送催化燃燒室進行凈化，不需外部能量，運行費用低，節能*。
三、結構
催化燃燒系統含：熱交換器，催化燃燒凈化器（加熱箱+催化反應室），緩沖箱
四、工作原理
該工藝主要采用高效催化劑，廢氣在催化劑作用下發生氧化反應，生成無毒無味的二氧化碳（CO2）和水（H2O）； 
其*的高效換熱系統保證了余熱的有效回收，當廢氣濃度達到一定程度時，換熱系統能使有機廢氣加熱到催化氧化反應的起始溫度，無需電加熱，通過自身熱量平衡處理有機廢氣。
該裝置是將濃縮的有機廢氣引入主要設備。有機廢氣經內裝加熱裝置從活性炭層中將有機物分離后，通過催化劑的作用分解成水和二氧化碳，同時釋放能量，由熱交換裝置置換能量，用于維護設備自燃的能源。
當催化床溫度達到250～300℃時，催化燃燒床開始反應，利用廢氣燃燒產生的熱空氣循環使用，此時電加熱停止，不需要外加熱，單床脫附，脫附時間為2~3小時，設定時間活性炭吸附箱定時自動切換脫附，內部裝填的陶瓷蜂窩體貴金屬催化劑使用壽命為8000小時。整個脫附系統采用多點溫度控制，保證脫附效果的穩定。

Widely used in petroleum, chemical, rubber, coating, printing and other industries volatile organic waste gas in the purification process, benzene, alcohols, ethers and other organic waste can be purified. The system design of the device is complete, the auxiliary equipment is complete, the purification efficiency is high, and the degree of automation is high. It can effectively clean the workshop environment, eliminate pollution, improve labor operating conditions, ensure the health of workers, and solve secondary pollution. The most suitable for low concentration (50 ~ 1000ppm) and the recovery of economic value is not, should not use the adsorption of organic waste gas treatment, especially for large wind volume treatment occasions, can obtain satisfactory economic and social benefits.
Second, product advantages:
1. Advanced design principle, unique materials, stable performance, simple structure, safety, reliability, energy saving, no secondary pollution. The equipment has a small footprint and light weight.
2, the use of ceramic honeycomb as a carrier of precious metal catalyst, low resistance, high activity. When the organic vapor concentration reaches 2000 ppm or more, spontaneous combustion can be maintained.
3, small power consumption, due to small bed resistance, with a low pressure fan can work, low power consumption, low noise.
4. The activated carbon layer that adsorbs organic waste gas is desorption-regenerated with the exhaust gas after catalytic combustion. The adsorbed gas is sent to the catalytic combustion chamber for purification. No external energy is required, the operation cost is low, and the energy-saving effect is significant.