進口電動隔膜泵,德國凱森進口電動隔膜泵
●不需灌引水，自吸能力達7米以上。
●通過性能好，直徑在10毫米以下的顆粒、泥漿等均可以毫不費力地通過。
●由于隔膜將被輸送介質和傳動機械件分開，所以介質不會向外泄漏。且泵本身無軸封，使用壽命大大延長。根據不同介質，隔膜分為氯丁橡膠、氟橡膠、丁晴橡膠等，*可以滿足不同用戶的要求。

詳細介紹

進口電動隔膜泵,德國凱森進口電動隔膜泵

KS.Electric diaphragm pump

德國KAYSEN凱森進口電動隔膜泵概述：

Overview of Electric Diaphragm Pumps
德國凱森進口電動隔膜泵采用擺線針輪減速機傳動，通過曲軸滑塊機構帶動雙隔膜作往復運動，使工作腔容積發生交替變化從而達到將液體不斷地吸入和排出，近年來，由于在隔膜材質上取得了突破性的進展，隔膜泵廣泛應用于石化、陶瓷、冶金等行業。隔膜泵特點是不需灌引水，自吸能力強，噪音小。直接將被輸送介質和傳動機械件分開，所以介質不會向外泄漏。且泵本身無軸液封，使用壽命大大延長。應用領域：噴漆、陶瓷業中隔膜泵已占有的主導地位；環保、廢水處理、建筑、排污、精細化工中正在擴大它的*，并具有其他泵不可替代的地位。

主要優點：Key advantages
●不需灌引水，自吸能力達7米以上。
●通過性能好，直徑在10毫米以下的顆粒、泥漿等均可以毫不費力地通過。
●由于隔膜將被輸送介質和傳動機械件分開，所以介質不會向外泄漏。且泵本身無軸封，使用壽命大大延長。根據不同介質，隔膜分為氯丁橡膠、氟橡膠、丁晴橡膠等，*可以滿足不同用戶的要求。
●體積小重量輕：由于采用了行星擺線傳動結構，故使泵型獲得小尺寸如與同類型泵來比較，其體積重量均下降一半左右。
●泵體介質流經部份，可根據用戶要求，分為鑄鐵、不銹鋼、襯膠、電機分為普通式、防爆式、變頻式、電磁調速式，該泵正應用在下列場合。

主要應用：Main application
●各種特殊介質的吸送
●各種劇毒、易燃、易揮發液體
●泵吸油漆、樹膠、顏料粘合劑
●泵吸泡菜、果醬、土豆泥、巧克力等
●各種橡膠漿乳膠、有機溶劑、填料。
●各種瓷器釉漿、水泥灌漿、灰漿、泥漿
●可輸送較高溫度的介質150℃
●作為各種壓濾機前級送壓裝置
●用泵為油輪駁船清倉吸取倉內污水及剩油
● 熱水回收及循環
●啤酒花及發酵粉稀漿、糖漿、糖蜜。
●油罐車、油庫、油品裝卸
●各種強酸、強堿、強腐蝕液體
●泵吸礦井、坑道、隧道、下水道中污水、沉淀物

主要參數：The main parameters

zui大流量：12.8-480L/min

zui大揚程：40-70m

出口壓力：0.4-0.7MPa

口徑：10-125mm

轉速：1450r/min

電機功率：0.55-5.5kw

Germany KAYSEN Kaisheng imported electric diaphragm pump Overview:
Germany Kaisheng imported electric diaphragm pump with cycloid reducer transmission, through the crankshaft slider mechanism to drive double diaphragm for reciprocating motion, so that the working chamber volume alternay changes in order to achieve the liquid inhalation and discharge, in recent years, due to Diaphragm material has made a breakthrough in the development of diaphragm pumps are widely used in petrochemical, ceramics, metallurgical and other industries. Diaphragm pump is characterized by no irrigation water, self-priming ability, low noise. Will be directly transported by the transmission and mechanical parts separay, so the media will not leak out. And the pump itself without shaft seal, greatly extend the service life. Applications: Painting, ceramic industry in the diaphragm has occupied an absolute dominant position; environmental protection, wastewater treatment, construction, sewage, fine chemical industry is expanding its market share, and has other pump irreplaceable position.

Key Benefits:
● no water, self-priming capacity of more than 7 meters.
● through the performance is good, the diameter of 10 mm below the particles, mud, etc. can be effortlessly through.
● Since the diaphragm will be separated from the conveying medium and the transmission part, the medium will never leak outwards. And the pump itself without shaft seal, greatly extend the service life. According to different media, the diaphragm is divided into chloroprene rubber, fluorine rubber, Dingqing rubber, etc., can meet the requirements of different users.
● small size and light weight: As a result of the planetary cycloidal transmission structure, so the pump type to obtain small size as compared with the same type of pump, the volume and weight are reduced by about half.
● Pump body flow through the part, according to user requirements, divided into cast iron, stainless steel, rubber, motor is divided into ordinary type, explosion-proof, frequency, electromagnetic speed, the pump is used in the following occasions.

main application:
● the absorption of various special media
● A variety of highly toxic, flammable, volatile liquid
● Pump suction paint, gum, pigment binder
● pump pickles, jam, mashed potatoes, chocolate and so on
● all kinds of rubber latex, organic solvents, fillers.
● all kinds of porcelain glaze pulp, cement grouting, mortar, mud
● can transport higher temperature media 150 ℃
● as a variety of pressure filter before the pressure device
● With the pump for the tanker barge clearance to absorb the sewage inside the warehouse and the remaining oil
Hot water recovery and circulation
● hops and baking powder slurry, syrup, molasses.
● tankers, oil depots, oil handling
● all kinds of strong acid, alkali, strong corrosive liquid
● Pumping wells, tunnels, tunnels, sewers, sewage, sediment

main feature:

Maximum flow: 12.8-480L / min
Maximum head: 40-70m
Outlet pressure: 0.4-0.7MPa
Caliber: 10-125mm
Speed: 1450r / min
Motor power: 0.55-5.5kw

德國KAYSEN凱森生產車間

德國KAYSEN凱森水泵檢查