FT-3900粉末屈服強度分析儀
FT-3900 powder yield strength analyzer
一、描述：description:
自動化測量控制模塊，PC軟件系統對數據圖譜及報表分析，少量樣品，可設定之變化應力.
采用單軸測試法：通過給粉末一個固定或多個固結應力，與其破壞這個固結應力所需要的無側限屈服強度應力（也叫開放屈服強度）來評價和評估粉體流動函數、體積密度、流動因子，時間固結函數等數據來分析粉末的流動表征.通過測量我們可以分析料斗、倉儲、運輸、傳輸過程中、壓片工藝、混料、粉體的結塊、搭橋及不流動現象，實驗室質量管控，對供應商的選擇及合理調整配方及成本.
一般來講粘性粉體的固結應力會大于破壞這個應力下粉體的無側限屈服強度應力，表征粉體的流動性低些；反之對于能自由流動的粉體會小.
High-precision automated measurement and control module, PC software system for data analysis and report analysis, only a small number of samples can be set to change the stress.
The uniaxial test method is used to evaluate and evaluate the powder flow function by plotting a fixed or multiple consolidation stress to the powder, as well as the unconfined yield strength stress (also called open yield strength) required to destroy the consolidation stress Density, flow factor, time consolidation function and other data to analyze the flow of the powder characterization.Through the measurement we can improve and prevent hopper, storage, transportation, transmission process, tabletting process, mixing, powder agglomeration, Non-flow phenomenon, laboratory quality control, help quality suppliers to choose and improve the formula and reduce costs.
In general, the consolidation stress of the viscous powder will be greater than the unconfined yield strength stress of the powder under this stress, which indicates that the fluidity of the powder is lower; otherwise, the free-flowing powder will be small.
二、參數parameter：
1.應力范圍Stress： 0-1000kPa
2.樣品量Sample volume of at least: 10ml
3.數據自動分析和處理結果. Data automatic analysis and processing results.
4.自動高度數據采集. Automatic height data acquisition.
5.電源Power：220v
6.工作環境：實驗室條件Working environment: laboratory conditions
7.凈重量約Net weight about：35kg
8.壓力校準砝碼Pressure calibration weight:2個
9.其他規格樣品槽可以定制Other specifications Trace sample tank can be customized.
會員1.png)
