The Hitech K1550 accuray measures the changes of one constituent in binary or pseudo-binary gas mixtures （ie, mixtures in which only one constituent changes）. Examples include hydrogen, carbon dioxide, argon, helium and various halogenated hydrocarbons such as the Freons. Almost any single constituent of a gas mixture can be measured providing its thermal conductivity differs from that of the other components. Ranges for K1550 from high ppm to 100% are possible depending on the gas being measured.
A katharometer sensor measures the thermal conductivity of the gas. The sensor incorporates a highly sensitive, non-depleting element of low thermal capacity, which requires no maintenance. Signal processing and temperature compensation are provided by a microprocessor to give a level of accuracy and a range not normally associated with this type of sensor. Little or no calibration is required because of the system's inherent high stability.
Measured values for K1550 are presented on a large, clear LCD which also displays messages and prompts for the menu driven configuration and calibration routines.
Two concentration alarms with K1550 provide visual （LED） indication and volt-free changeover contacts. They are user configurable for function （High, Low or Off） and hysteresis value.
High-level 4 to 20mA output is provided for K1550; the span can be user programmed on most models.
The instrument K1550R is packaged in a standard DIN panel-mounting enclosure （96 x 144mm） with an optional locking door to IP54 sealing standard. The sensor can either be mounted within the enclosure or remoy, depending upon the application.
 

Options

For hazardous area applications, K1550FX is the suitable product.  The sensor may be mounted remoy in the hazardous area and connected to the electronics unit in the safe area through a suitable MTL intrinsically safe interface.

For sampling, a variety of systems is available and any necessary pumps, filters and take-off tubes can also be supplied.