
產品型號:JSR0207
產品名稱:雷德法自動蒸氣壓測定器(JSR0207)
產品說明:
JSR0207雷德法自動蒸氣壓測定器
一、符合GB/T8017和ASTMD323標準
二、主要技術參數:
控溫方式:進口數顯溫控儀自動控溫
水浴溫度:37.8±0.1℃
測壓范圍:0~95KPa
壓力顯示:數顯壓力顯示
彈體容積:空氣室:3×Φ51×254±3 mm
汽油室:3×Φ51×63.5±3 mm
(V空 : V汽=3.95~4.05)
振蕩方式:水平自動正反向旋轉
工作電源:AC220V±10% 50Hz
功 率:2KW
三、性能及特點
1、采用進技術,試驗彈體自動旋轉振蕩,每20秒旋轉一次,然后又以相同的速度向反方向旋轉,反復循環,自動振蕩;
2、采用進口數顯溫控儀自動控溫,控溫精度高,操作簡便,壽命長。
3、儀器外形式樣為臥式,水浴槽與蒸氣壓試驗彈體均為不銹鋼材料,防銹性能好;
4、水浴加熱采用電加熱方法,配有循環攪拌泵,溫度差??;
5、浴內有3支試驗彈體,可在儀器上進行試樣的平行試驗。
JSR0207 automatic vapor pressure tester
I. Comply with GB/T8017 and ASTMD323 standard
Ii. Main Technical parameters:
Temperature control mode: Automatic temperature control with imported digital display temperature controller
Water bath temperature: 37.8±0.1℃
Pressure measuring range: 0 ~ 95KPa
Pressure display: digital pressure display
Projectile volume: air chamber: 3 * Φ 51 * 254 + 3 mm
Gasoline room: 3 * Φ 51 * 63.5 + / - 3 mm
(V air: V steam = 3.95 ~ 4.05)
Oscillating mode: horizontal automatic forward and backward rotation
Power supply: AC220V±10% 50Hz
Power: 2 kw
Iii. Performance and Characteristics
1. Adopting foreign advanced technology, the test projectile body rotates automatically, once every 20 seconds, and then rotates in the opposite direction at the same speed, repeatedly cycling, and automatically oscillating;
2. Adopt imported digital display temperature controller to automatically control temperature with high precision, easy operation and long service life.
3. The shape of the instrument is horizontal. The water bath and vapor pressure test projectile bodies are made of stainless steel with good rust resistance;
4. Electric heating method is adopted for water bath heating, equipped with circulating stirring pump, with small temperature difference;
5. There are three test projectile bodies in the bath. Parallel test of samples can be carried out on the instrument.