產品型號:JSH1101
產品名稱:潤滑油老化特性測定器(JSH1101)
產品說明:
JSH1101潤滑油老化特性測定器
一、符合SH/T0192標準
二、主要技術參數:
熱浴尺寸:350×140×70mm 4孔
加熱溫度:常溫~200℃±0.5℃
控溫方式:數顯溫控儀測控
氣體流量:250mL±4mL/mim
計時方式:電子計時
工作電源:AC220V±10% 50HZ
功 率:1000W
三、性能特點:
1、采用電加熱板對金屬鋁合金加熱,升溫快,熱容量大,溫度穩定,采用金屬浴代替油浴,克服了油的各種弊端;
2、儀器可從常溫至200℃范圍內任意一點溫度進行自動控制;
3、采用數顯溫控儀自動測溫和控溫,溫度數字顯示直觀,傳感反應快,分辯率高,測溫準確;
4、采用電子計時器,時間數顯,可在規定范圍內任意設置時間,方便可靠;
5、采用時間繼電器控時,當達到所設定的時間時,儀器自動報警,同時切斷電源;
6、儀器有4孔,可同時插入4只氧化管,對比做樣。
JSH1101 lubricating oil aging characteristic tester
I. Comply with SH/T0192 standard
Ii. Main Technical parameters:
Hot bath size: 350×140×70mm 4 holes
Heating temperature: room temperature ~ 200℃±0.5℃
Temperature control mode: digital display temperature controller
Gas flow rate: 250mL±4mL/mim
Timing: Electronic timing
Power supply: AC220V± 10% 50HZ
Power: 1000 w
Iii. Performance Characteristics:
1. The electric heating plate is used to heat the metal aluminum alloy, which has the advantages of fast heating, large heat capacity and stable temperature. The metal bath is used to replace the oil bath, which overcomes various disadvantages of oil.
2. The instrument can be automatically controlled from room temperature to 200℃ at any point;
3. Adopt digital display temperature controller to automatically measure temperature and control temperature, temperature digital display is intuitive, sensing response is fast, resolution is high, temperature measurement is accurate;
4. Electronic timer and time digital display can be used to set the time arbitrarily within the specified range, which is convenient and reliable;
5. When the time relay is used for control, when the set time is reached, the instrument will automatically alarm and cut off the power supply;
6. The instrument has 4 holes, and 4 oxidation tubes can be inserted at the same time for comparison.