JSH2801石油產品自動苯胺點測定器 一、符合GB/T262、ISO2977標準 二、主要技術參數 測試范圍:常溫~170℃ 工作模式:自動光電檢測,單片機控制 溫度檢測:鉑電阻檢測 冷卻速率:1℃/min ~ 2℃/min 工作電源:AC220V±10% 50HZ 外形尺寸:255×340×520 mm (長×寬×高) 整機重量:3Kg 三、性能及特點: 1、儀器用單片機自動控制完成檢測苯胺點的全過程,檢測速度快,重復性好。 2、儀器采用光電自動檢測,自動判斷苯胺點,對淺色油和深色油都能準確測試。 3、儀器使用專用測試管,升溫時間短,清洗方便,清洗時不用取下測試管。 JSH2801 petroleum products automatic aniline point tester I. Comply with GB/T262, ISO2977 standards Ii. Main technical parameters Test range: room temperature ~ 170℃ Working mode: automatic photoelectric detection, SCM control Temperature detection: Platinum resistance detection Cooling rate: 1℃/min ~ 2℃/min Power supply: AC220V±10% 50HZ Dimensions: 255×340×520 mm (length × width × height) Machine weight: 3Kg Iii. Performance and Characteristics: 1. The whole process of detecting aniline points is automatically controlled by the single chip microcomputer with fast detection speed and good repeatability. 2, the instrument adopts photoelectric automatic detection, automatic determination of aniline point, light oil and dark oil can be accurately tested. 3. The instrument USES special test tube, short heating time, convenient cleaning, do not remove the test tube when cleaning. |