產品型號：JSR1803產品名稱：噴氣燃料冰點測定器(JSR1803)產品說明：JSR1803航空燃料冰點測定器一、符合GB/T2430和IS03013標準二、主要技術參數：控溫范圍：常溫～-70℃控溫精度：±0

詳細介紹

產品型號：JSR1803

產品名稱：噴氣燃料冰點測定器(JSR1803)

產品說明：

JSR1803航空燃料冰點測定器

一、符合GB/T2430和IS03013標準

二、主要技術參數：

控溫范圍：常溫～-70℃

控溫精度：±0.5℃

控溫方式：進口山武數顯溫控儀自動控溫

攪拌方式：電機攪拌

試樣孔數：單孔

整機功率：1.7KW

工作電源：AC220V±10％ 50HZ

三、性能及特點：

1、采用復疊式壓縮機制冷，制冷量大，降溫速度快，溫度可達-70℃。

2、采用杜瓦瓶保溫，觀察試樣的結晶狀態十分方便。

3、采用電熱管加熱和壓縮機致冷方式調節恒溫浴溫度，既能升溫又能降溫，確保恒溫浴溫度能恒定在-70℃～常溫之間的任一點。

JSR1803 jet fuel freezing point tester

I. It conforms to GB/T2430 and IS03013 standards

Ii. Main Technical parameters:

Temperature control range: normal temperature ~ -70℃

Temperature control accuracy: ±0.5℃

Temperature control mode: Imported Shanwu digital temperature controller automatic temperature control

Stirring mode: motor stirring

Sample hole number: single hole

Machine power: 1.7KW

Power supply: AC220V± 10% 50HZ

Iii. Performance and Characteristics:

1, the use of multiple compressor refrigeration, large cooling capacity, fast cooling speed, the lowest temperature up to -70℃.

2. Dewar bottle is used for insulation, and it is very convenient to observe the crystallization state of the sample.

3, the use of electric heat pipe heating and cooling compressor to adjust the temperature of the constant temperature bath, can not only heat up and cool down, to ensure that the constant temperature of the constant temperature bath can be kept in -70℃ ~ room temperature at any point.

關鍵詞：壓縮機