· Double layer steel casing with air cooling. 

· Two cooling fans inside to keep  case temperature < 55^oC.

· 內爐膛表面涂有美國進口的高溫氧化鋁涂層可以提高設備的加熱效率，同時也可以延長爐膛的使用壽命

· 

High purity Alumina refractory chamber

· 

· 

Vacuum and gas mixing system is located in bottom cart with 4 wheel.

· 

Vacuum flange, gauge, valves, pipe and high vacuum pump are included for immediate use.

 6 Kw

AC 208-240V Single Phase, 50/60 Hz

8?pcs1800^oC grade MoSi₂ heating element

1650 ^oC (< 2hours )（更新時間：19.12.10--JS2）

1600 ^oC

≤5  ^oC /min

Premier Grade alumina tube made in USA.

（標配尺寸） ( 60mm) O.D.x I.D. (54mm) x 1000mm Length

· 

· 

（選配尺寸） ( 80mm) O.D.x I.D. (74mm) x  1000mm Length 

· 

· 

Two pairs of SS tune support is installed to avoid tube bending under high temperature (click picture below to see details).

Heating zone length: 457 mm (18")

· 

· 

Constant Temperature Zone length: 150 mm (6")(+/-1^oC) 注：由于測量手段及外部環境的影響，測量結果可能會有偏差，此參數僅供參考不作為該設備的技術指標。您購買產品需要準確的恒溫區數據，請與我公司銷售人員聯系 

One precision digital temperature controller programmable with 50 segments.

· 

· 

PID adjustable with auto tune function to ensure temperature stability within  +/- 1 ^oC.    

· 

· 

控溫儀表操作視頻

· 

· 

Full protection in each controller for over-temperature and broken thermal couple.

B type thermal couples built in

· Two stainless steel flanges with vacuum hose and gas fitting pipe. One flange is installed with KFD-40 adaptor and ball valve.

· Double high temperature silicone O-ring for using under 300^oC.

Porous alumina blocks included for protecting flange from heat radiation.

 Tow stages vacuum pump installed in bottom case:

· 

OneDouble Steps Rotary Vane High Speed Mechanical Vacuum Pump- T2XZ-4C110with max. vacuum pressure of 10^-2 torr.  

· 

· 

One turbo molecular pump with max. vacuum pressure of 2x10^-5 torr.

One precision vacuum sensor installed. 

· 

· 

Stainless steel hose tube is included for connecting to tube furnace.

· 

· 

Digital vacuum meter / controller installed.

Vacuum sensor is installed to vacuum flange on tube furnace, and connect to a digital vacuum pressure display.

· 

· 

Vacuum controller and display areinstalled in bottom cart.

· 9 precision mass flow meters (CS200) controllers are installed in bottom  cart with digital display panel of+/-1% of Full Scale (accuracy is within 35%-99% of full scale) 

· 3 MFC at range 0 - 1000scc

· 3 MFC at range 0 - 200scc

· 3 MFC at range 0 - 10 scc

· one floating meter will be installed for N2 gas only

· one mechanical pressure meters are installed in bottom cart for monitor each gas 's pressure in mixer.

· 9mass flow MFC control panels/displays with dial button to adjust gas flow rate. Please see picture below.

Software ａnd interface (optional at extra cost).  Please click uderline for software operation instruction

· SS 316 1/4" pipe/fitting

· SS 316 vacuum needle valves

· 21 sets of stainless steel vacuum valves are installed outside of  right side panel of cabinet to control, vacuum pump, flowing gases and two inlet gases separately.

Please click here to see sketch of pipe connection.

Furnace: 550 x 380 x 520  Bottom case: 600x600x597

about 100 kg

200 Lbs 

Two cases in one plastic pallet: 45x45x35/case

One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)

· 

· 

 CE Certificate