Resistance heating is one of the first applications of electricity..
In the course of a century, thousands of heating problems have been solved ranging from megawatts down to a few watts, or less.
The fundamentals are always the same, the requirements and solutions widely different.
Between a large furnace constructed as an individual unit and a domestic heater produced in large quantities, there exist a number of cases where no “ready-made" solution is available.
For such cases, THERMOCOAX often presents a suitable answer to: Heating from the cryogenic temperatures up to
>1000°C. Heat dissipation either very low or very high power (from few watts to several tens of kilowatts). For use in air, under vacuum or high pressure and in any corrosive environment compatible with the sheath material. In applications requiring high reliability components.
Easy fitting
Electrical screening THERMOCOAX heaters can be attached directly to metal parts
Tight bending radius Only 3 times the outer diameter
Small dimensions The heat can be generated exactly where it is required thus power losses are reduced as well as power consumption
Excellent heat exchange The heater can be brazed onto any metal piece