當前位置：上海熙浩實業有限公司>>探傷儀>>DA400S磁粉探傷儀

DA400S磁粉探傷儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號DA400S磁粉探傷儀

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：張小姐,李小姐,李先生查看聯系方式

更新時間：2023-09-08 10:15:46瀏覽次數：162次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  探傷儀

全部產品列表

暫無信息

上海熙浩實業有限公司

經營模式：其他

商鋪產品：130條

所在地區：

聯系人：張小姐,李小姐,李先生

詢價 給他留言

產品簡介

DA400S磁粉探傷儀采用了許多*技術來形成感應磁場，具有通用性，固定的AC或DC磁場，用于表面和近表面缺陷的檢測，是控制器與固態電子器件為一體的高性能的輕便儀

詳細介紹

DA400S磁粉探傷儀

美國派克便攜式DA400S磁粉探傷儀：
美國PARKER公司磁粉探傷儀DA-400采用了許多*技術來形成感應磁場，具有通用性，固定的AC或DC磁場，用于表面和近表面缺陷的檢測，是控制器與固態電子器件為一體的高性能的輕便儀。可疳高能磁場集中施加到檢測區，快速準確發現材料缺陷。磁極可將AC或DC磁場施加到各種形狀工件的檢測區域，沒有電弧**。

DA400S磁粉探傷儀的技術參數：

型號	DA400	DA400S
電源	110VAC 50-60Hz	230VAC 50-60Hz
電流	4A	3A
磁場	交流	交直流
工作周期	2分鐘開/關	2分鐘開/關
重量	3.68Kg	3.68Kg
尺寸	18823554mm	18823554mm
磁極間距	0-305mm	0-305mm
電纜	3芯2m長電纜	3芯2m長電纜

DA-400 Series Contour Probes^®

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape... in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

Versatility and powerful performance in a lightweight (8 lbs.) instrument
Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
Apply continuous or residual magnetic fields and demagnetize too
Use with dry powder, wet fluorescent or visible
High impact molded housing
One year repair/replacement guarantee

DA-400s Series Contour Probes^®SPECIFICATIONS

Electronics	Reliable solid state circuitry contained within molded housing
Mechanical capacity	Minimum-Maximum distance across poles: 0 to 12"(0-305mm)
Fields – selective	AC: constant level DC: pulsed DC Flux density approximately 68,000 lines per square inch at 4" pole spacing. (50 pound pull.)
Power source	105-230 VAC, 50-60 Hz, 4 Amps 3-connector power cord and plug. (Available in export voltages.)
Controls	1 Momentary, push to test 2 AC/DC selector switch
weight	3.4kg
Finish	Injection Molded Housing Glass Filled Nylon®