The Dytran 5334 is a high temperature hybrid vibration monitoring system, consisting of a charge mode accelerometer and in-line miniature differential charge amplifier operating from a constant current 2-wire (IEPE) power unit, permanently joined together as a single unit with an interconnecting integral hardline cable.
The unique configuration of the Dytran model 5334 is known as a hybrid system because it combines both IEPE and charge mode piezoelectric technologies into a single operating unit. The accelerometer is connected to the input of the charge amplifier via an 18-inch long hardline cable (SiO2 insulated) which is unaffected by high temperatures at the point of measurement.
The model 5334 features a case isolated design to avoid EMI/ground loop interference, with hermetic sealing for reliable operation in high humidity and dirty environments. Units offer an industry standard tri-bolt mount, stainless steel construction, and incorporate the use of ultra high temperature piezoelectric crystals in compression mode for extremely stable operation at temperatures up to +900°F (+482°C).
特性
1.10 mV/g sensitivity
2.500g range
3.4.8 to 660 frequency range (±5%)
4.18-inch integral hardline cable assembly
5.Tri-bolt mount
6.150 grams
7.Stainless steel
8.Hermetic
9.Case isolated
10.Integrated differential amplifier
11.Uniquely combines IEPE and charge output technology, seamlessly operating as a single unit
12.+900°F (+482°C) operation
13.IEPE
應用
1.High temperature industrial vibration monitoring
高溫工業振動監測
2.High temperature turbine vibration measurements
高溫渦輪振動測試
3.General purpose high temperature monitoring
通用高溫監測
WEIGHT, including cables, accel and amplifier 150 grams
MOUNTING PROVISION Three-hole flange for #8 SCREWS
CABLE FROM ACCEL. TO CHG. AMP., (18 in LENGTH) 2-conductor shielded hardline cable
CONNECTOR FROM CHARGE AMPLIFIER D38999/25YA98PA
MATERIAL, ACCELEROMETER 304L CRES
PERFORMANCE (SYSTEM)
SENSITIVITY, ±5% [1] 10 mV/g
RANGE F.S. FOR ± 5 VOLTS OUTPUT ± 500 g
FREQUENCY RANGE, ± 5% 4.8 to 660 Hz
FREQUENCY RANGE, -3db 1.6 to 2000 Hz
RESONANT FREQUENCY, NOM. 35 kHz
EQUIVALENT ELECTRICAL NOISE FLOOR .01 grms
LINEARITY [2] ± 2% % F.S.
TRANSVERSE SENSITIVITY, MAX. 5 %
STRAIN SENSITIVITY @ 250 με .012 g/με
ENVIRONMENTAL
MAXIMUM VIBRATION ±600 gpk
MAXIMUM SHOCK ±2000 gpk
TEMPERATURE RANGE (ACCELEROMETER) -65 to +900 °F
TEMPERATURE RANGE (CHARGE AMPLIFIER) -50 TO +185 °F
SEAL, (ACCELEROMETER & CHG. AMP) HERMETIC Ceramic-to-metal and laser welded
COEFFICIENT OF THERMAL SENSITIVITY .02 %/oC
ELECTRICAL
SUPPLY CURRENT RANGE [3] 4 to 20 mA
COMPLIANCE VOLTAGE RANGE 15 to 30 Volts
OUTPUT IMPEDANCE, TYP. 100 Ohms
BIAS VOLTAGE, +8 VOLTS NOM. +7 to +9 VDC
DISCHARGE TIME CONSTANT, NOM. 0.1 Sec
OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP Positive
ELECTRICAL ISOLATION, GROUND WIRE TO CASE 10 Megohms, min.