
產品型號:JSH1201
產品名稱:潤滑油抗氧化安定性測定器(JSH1201)
產品說明:
JSH1201潤滑油抗氧化安定性測定器
一、符合SH/T0196標準
二、主要技術參數:
控溫范圍:常溫~125℃
控溫精度:±0.5℃
控溫方式:數顯溫控儀控溫
加熱方式:電熱管加熱
加熱功率:2KW
攪拌方式:電機攪拌
試樣孔數:8孔
流量控制:氧氣流量計 (0~400mL 4只)
空氣流量計 (0~100mL 4只)
工作電源:AC220V±10% 50HZ
三、性能特點:
1、采用進口溫控器控溫,數顯直觀,控溫精度高;
2、采用快速接頭與進氣嘴連接,裝卸方便;
3、采用不銹鋼油浴,電熱管加熱,升溫速度快,攪拌均勻。并裝有超溫自保裝置,使用安全可靠;
4、采用數顯時間計時器計時,顯示直觀,走時準確,并能根據時間設置定時報警;
5、儀器設計4路氧氣通道和4 路空氣通道,可分別控制其流量大小,并可同時做8個樣。
JSH1201 lubricating oil anti-oxidation stability tester
I. It conforms to SH/T0196 standard
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 125℃
Temperature control accuracy: ±0.5℃
Temperature control: Digital display temperature controller
Heating mode: Electric heat pipe heating
Heating power: 2KW
Stirring mode: motor stirring
Number of sample holes: 8
Flow control: Oxygen flowmeter (0 ~ 400mL 4 PCS)
Air flowmeter (0 ~ 100mL 4 PCS)
Power supply: AC220V± 10% 50HZ
Iii. Performance Characteristics:
1. Imported temperature controller is used to control temperature, with intuitive digital display and high temperature control accuracy;
2. Adopt quick joint to connect with air inlet, easy to load and unload;
3, the use of stainless steel oil bath, electric heat pipe heating, heating speed is fast, uniform stirring. And equipped with over-temperature self-protection device, safe and reliable use;
4. Digital display time timer is used for timing, intuitive display, accurate travel time, and timing alarm can be set according to the time;
5. The instrument is designed with 4 oxygen channels and 4 air channels, which can control the flow rate respectively and make 8 samples at the same time.