污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
東莞市宏圖儀器有限公司
東莞市宏圖儀器有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地
聯系方式：劉自芬查看聯系方式
更新時間：2024-12-15 08:57:09瀏覽次數：44次
聯系我時，請告知來自 環保在線暫無信息 |
BasicInfo
HT3020 Clamp Ground Resistance Tester (Practical)
I. Product Introduction
HT3020 Clamp Ground Resistance Tester is a new generation of groundless pile measurement method that our company's technical team meticulously developed. It uses a brａnd new generation of LCD, black screen backlight display and microprocessor technology to measure the grounding resistance through inductive method. When measuring a grounded system with a loop, it is not necessary to disconnect the ground lead wire, and no need for auxiliary electrodes. It is safe and fast. Widely used in telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, iron tower transmission lines, gas stations, factory grounding networks, lightning rods and so on. The instrument has the test precision, fast, simple , stable , reliable and other features
HT3020 Clamp Ground Resistance Tester is microprocessor controlled and accurately detects ground resistance. It uses a fast filtering technique to minimize interference. At the same time store 500 groups of data, with unique features such as numerical maintenance and intelligent alarm prompts
II. Technical Specification
| Function | Ground resistant test, Loop resistance test |
| Range | 0.01Ω-500Ω |
| Resolution | 0.001Ω |
| Accuracy | ±1%±0.01Ω |
| Power Supply | DC6V Alkaline Dry Battery (1.5V LR6 X 4) |
| Measurement Method | Mutual induction |
| Clamp Diameter | 55mmx32mm |
| Clock Function | Have |
| Display Mode | 4-digit LCD display, black screen design |
| LCD Dimension | 46mm×29mm |
| Meter Dimension | W/T/H: 85mm×58mmx285mm |
| Sampling Speed | About 2 times/second |
| Data Storage | 500 Groups, the symbol "MEM" gives indication, "FULL" mark will flash to indicate the memory has been full |
| Data Review | "MR" symbol indication when reviewing data |
| Overflow Display | Exceed measurement range overflow function: "OL " symbol display |
| Test Method | Clamp CT, Integral Method |
| Interference Test | Automatic identify interference signal, "NOISE" symbol indication when the interference current is large |
| Alarm Function | Alarm when the measured value exceeds the alarm setting value |
| Battery Voltage | Real-time display of battery power, reminding timely charging when battery voltage is low |
| Automatic shut-down | "APO" instruction, automatic shutdown after 5 minutes boot |
| Power Consumption | 50MA Max |
| Weight | Instrument: 1180g (with battery) |
| Working Temperature and Humidity | -10°C~40°C; below 80% rh |
| Insulation Resistance | 20Ω or more (500V between circuit and outside) |
| Pressure Resistance | AC 3700V/rms(between circuit and outside) |
| Suitable for Safety Regulations | IEC61010-1(CAT III 300V, CAT IV 150V, Pollution Degree 2); IEC61010-031; IEC61557-1 (grounding resistance) |
III. Accessories
| Meter | 1PC |
| Meter box | 1PC |
| 5# battery | 4PCS |
| Calibration ring | 1PC |
| Manual, certificate | 1SET |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
