丹富斯靜態平衡閥產品概述           流量平衡閥，靜態流量平衡閥作用
靜態平衡閥，是液體管路流量調節閥，其作用是方便、準確的調節流量，有效地解決管網系統中存在的冷熱不均、水力失調的問題。它不但有良好的調節性能，而且有開度顯示和開度功能，廣泛用于供暖和空調系統及其它需要調節流量的液體管路系統。由于該閥上還設有流量測壓小閥，可用智能儀表進行一次性調試，將系統中總水量控制在合理范圍內，達到管網平衡，因而節約能源顯著。

流量平衡閥，靜態流量平衡閥作用              

丹富斯靜態平衡閥特點
1.線性流量特性，開度大時流量大，開度小時流量?。?br />2.閥體采用直流式結構，流體阻力小；"
3.有開啟百分比顯示，開啟圈數與閥桿螺距的乘積，即為開度數值；
4.閥門進出口有測壓小閥，與智能儀表用軟管連接后，可以方便地測量出閥門前后的壓差和通過閥門的流量；          
5.密封面采用聚四氟乙烯，密封性能好，壽命長。
丹富斯技術參數
工作壓力：PN16 溫度范圍：0-120℃
連接：法蘭PN16 流量誤差：從*開度到50%開度±5%
丹富斯結構及外形尺寸

 Dan fuss static balancing valve product overview 
Static balancing valve is liquid pipe flow regulating valve, its role is convenient and accurate flow adjustment, effectively solve the uneven and that exist in the pipe network system, hydraulic disorder problem. It not only has the good regulation performance, and has the opening of the opening of the display and function, widely used in heating and air conditioning system and other need to adjust the flow of liquid pipeline system. Because the valve on the flow pressure also has small valve, smart meters available for one-off debugging, the system of total quantity control in the reasonable scope, a balanced network, thus save energy significantly. 
 
 
 
Static balancing valve 
Dan rich characteristics of static balance valve 
1. The linear flow characteristic, large flow, large opening opening hour traffic small; 
2. The valve body adopts once-through structure, fluid resistance is small; " 
3. There are open, according to the percentage opening laps of the stem and the product of the pitch, the is the opening value; 
4. The valve has a small pressure valve, import and export and inligent instrument with a hose connection, you can easily measure the valve before and after the differential pressure across the valve and discharge; 
5. Sealing surface using ptfe, sealed performance is good, long service life. 
Dan fuss technical parameters 
Job stress: PN16 temperature range: 0-120 ℃ 
Error: connection: flange PN16 flow of the opening of the opening from * to 50% plus or minus 5% 
Dan fuss structure and overall dimensions