一、功能
1.測試不同轉速下的各缸供油量；
2.靜態檢查各缸供油時間；
3.檢查機械調速器性能；
4.分配泵電磁閥的試驗；
5.檢查氣動調速器性能；
6.檢查壓力補償器性能；
7.分配泵回油量測量；
8.測量分配泵泵體內壓；
9.檢查氣膜調速器負壓性能；
10.測量齒條行程；
11.進行噴油泵密封性能試驗；
12.測試噴油泵提前角功能；
13.檢測濟柴12V190高壓油泵的各項性能.
14.三T型加大工作臺 隨機佩帶大流量標準噴油器。
二：、大功率噴油泵試驗臺主要技術參數：
1.量筒：150/260CC各一套；
2.燃油箱容積：75L；
3.油溫自動控制：40±2℃；
4.試驗油濾油精度：5μ；
5.直流電壓12V和24V；
6.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;
7.泵體內壓顯示：0~0.16Mpa及0~1.6Mpa；
8.氣壓顯示：正壓：0~0.3Mpa負壓：-0.03~0Mpa；
9.轉速預置：0~3000RPM可任意預置；
10.齒條行程量程：0~25MM；
11.中心高：125MM；
12.飛輪慣量：0.8KG.M2;
13.輸出功率：30KW 37KW 45KW等；
A, functionality,
1. The test of each cylinder oil under different rotational ;
2. Static checking each cylinder fuel delivery time;
3. Check the mechanical governor performance;
4. The distribution pump electromagnetic valve test;
5. Check the pneumatic governor performance;
6. Check the pressure compensator performance;
7. Distribution pump oil return quantity measurement;
8. Measure the distribution of pump pressure in the pump body;
9. Check the gas film negative pressure performance;
10. Measurement rack travel;
11. The fuel injection pump seal performance test;
The function of test pump advance Angle;
13. Test JiChai 12 v190 various properties of high pressure oil pump.
14. 3 T increase the workbench Random wear big flow standard injector.
B:, high-power pump test-bed main technical parameters:
1. The measuring cylinder: 150/260 cc each of a set of;
2. The fuel tank volume: 75 l;
3. The oil temperature automatic control: 40 plus or minus 2 ℃;
4. The test accuracy of oil filter oil: 5 mu;
5. 12 v and 24 v dc voltage;
6. The oil pressure, low pressure: 0 ~ 0.4 Mpa, high pressure: 0 ~ 4 Mpa;
7. The pressure in the pump body shows: 0 ~ 0.16 Mpa and 0 ~ 1.6 Mpa;
8. Pressure show that the positive pressure: 0 ~ 0.3 Mpa pressure: 0.03 Mpa ~ 0;
9. The preset : 0 ~ 3000 RPM can be arbitrary presets.
10. The rack travel range: 0 ~ 25 mm;
11. High center: 125 mm;
12. The flywheel moment of inertia: 0.8 KG. M2;
13. The output power: 37 kw to 45 kw, 30 kw, etc.;
會員1.png)
